Glacier bay 67734-6001 Guía De Uso Y Mantenimiento página 4

Installation
1
Installing the douche spray
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□
Shut off the water supply. Remove the old
faucet.
□
Clean the mounting surface.
□
Remove the preassembled lock nut (I) and
metal washer (H) from the douche spray (G).
□
Place the douche spray (G) through the mounting
hole in the bidet.
□
Secure the douche spray (G) to the bidet using
the metal washer (H) and lock nut (I).
G
H
I
2
Installing the transfer valve
□
Remove the preassembled Y-adapter (P), lock
nut (O) and washer (L, M & N) from the transfer
valve body (K).
□
Before installation, the handle clockwise rotation
in the end and ensure that the handle (1) is front,
as shown.
□
Place the transfer valve body (K) up through the
bidet hole.
□
Apply silicone sealant (not included) in and
outside of the rubber washer (L).
□
Secure the transfer valve body (K) to deck using
the washer (L, M & N) and lock nut (O). Install the
Y-adapter (P) onto the transfer valve body (K).
4
1
K
L
M
N
O
P