Bluetooth® Operations; Cellular Phone/Audio Player - JVC KW-AVX800 Manual De Instrucciones

Bluetooth® operations —
For Bluetooth operations, it is required to connect the
Bluetooth Adapter (KS-BTA200) to the CD changer jack
on the rear.
• Refer also to the instructions supplied with the
Bluetooth Adapter and the Bluetooth device.
• Refer to the list (included in the box) to see the
countries where you may use the Bluetooth®
function.
To use a Bluetooth device through the unit ("Bluetooth
PHONE" and "Bluetooth AUDIO") for the first time,
you need to establish Bluetooth wireless connection
between the unit and the device.
• Once the connection is established, it is registered in
the unit even if you reset your unit. Up to five devices
can be registered in total.
• Only one device can be connected at a time for each
source ("Bluetooth PHONE" and "Bluetooth AUDIO").
Registering a Bluetooth device
Registration (Pairing) methods
Use either of the following items in the <Bluetooth>
menu to register and establish the connection with a
device.
• Select "Bluetooth PHONE" or "Bluetooth AUDIO" as
the source to operate the <Bluetooth> menu.
Menu item To do
Open Make the unit ready to establish
a new Bluetooth connection.
Connection is established by
operating the Bluetooth device.
Search Make the unit ready to establish
a new Bluetooth connection.
Connection is established by
operating this unit.

Cellular phone/audio player

To register using <Open>
Preparation: Operate the device to turn on its
Bluetooth function.
1
• You can also use AV MENU on the monitor panel.
• Make sure "New Device" is selected. If not, press
5 ∞
[ ] or [ ] to select it.
2
3
4
Enter a PIN (Personal Identification
Number)* code to the unit.
• You can enter any number you like (1-digit to
16-digit number).
* Some devices have their own PIN code. Enter the
specified PIN code to the unit.
34
Go to other menu items