Using The Bluetooth Cellular Phone - JVC KW-AVX800 Manual De Instrucciones

Using the Bluetooth cellular phone

Sound mode
( page 51)
Bluetooth icon
lights up when
the adapter is
connected.
: Buttons on the touch panel. In the
explanation, they are indicated
inside [ ].
1
* When a cellular phone with audio function is connected, appears.
2
* This adjustment does not affect the volume level of the other sources.
~
Press [SOURCE], then press [Bluetooth PHONE].
• You can also use SOURCE on the monitor panel. Press it repeatedly.
Ÿ
Press [AV Menu].
• You can also use AV MENU on the monitor panel.
!
Press [Bluetooth].
⁄
Establish the connection with a device, then make a
call (or settings using the <Bluetooth> menu).
pages 62 and 63
When a call comes in...
The source is changed to "Bluetooth PHONE"
automatically.
Name and phone number (if acquired)
When <Auto Answer> is activated...
The unit answers the incoming calls automatically. (
page 63)
page 38
Adjust the volume of the incoming calls
AV MENU
[ ] Hold: Activates <
[5 ∞]
Select the registered device
("New Device" appears when a new device can be
registered.)
( page 9)
When <Auto Answer> is deactivated...
To answer the incoming call
• Press any button on the monitor panel (except
/ATT or +/–).
• Press the message displayed on the touch panel.
To end the call
• Hold any button on the monitor panel (except
/ATT or +/–).
• Hold the message displayed on the touch panel.
• You can adjust the microphone volume. ( page 63)
36
* 1
Status of the device
Signal strength/Battery
remainder
(only when the information
comes from the device)
2
*
Voice Dialing
>