RIDGID HD1200M0 Manual Del Usuario página 23

ASSEMBLY
Remove Hose:
1. Rotate Hose End in either direction to
disengage Inlet Ridges.
2. Press the Hose Release Button and
pull the Hose End straight out of the
Vac Inlet.
1
2
REMOVE
HOSE
INSERT
HOSE
Inlet
Ridges
Hose Release Button
SP7071-2 HD1200M0.indb 23
Locking Accessories
1. To Connect Accessory:
Your RIDGID Wet/Dry Vac includes
Locking Accessories to prevent the
Accessories from falling off when in use.
To connect the Accessories, align the
Nozzle Ridges of the Accessory with
the Release Button of your Extension
Wand. Press to secure the Nozzle to
the Extension Wand.
1
CONNECT:
2. To Disconnect Accessory:
Twist the Nozzle and Extension Wand
to disengage the Nozzle Ridges and
pull. You may also press the Release
Button and pull to disengage.
DISCONNECT:
23
Extension Wand
Release Button
Accessory Nozzle
Ridges
Extension Wand
Release Button
Accessory Nozzle
Ridges
8/16/19 3:00 PM