General Information
This commercial battery powered Cordless Burnisher is the latest innovation at the forefront of daytime
cleaning. Its quietness of operation and compact design makes it ideal for use in a variety of environments.
It is especially suited for use on hard floors in hotels, schools, hospitals, factories, retail shops, stores and
offices.
Maintenance free (gel) batteries must be used which provide up to 2 hours running time. A battery life
indicator allows the operator to assess the degree of battery life available. An on board battery charger
provides a convenient way of charging. The machine can be fitted with an optional handle mounted
cleaning solution spray system, which can be operated while gripping the handle with both hands,
maintaining full control of the machine.
The following instructions contain important information about the Tornado Cordless Burnisher and safety
advice for the operator.
Equipment must be operated, serviced and maintained in accordance with the manufacturer's instructions.
If in doubt, contact the supplier of your machine.
Important Safety Advice
When using electrical equipment, basic safety precautions should be followed including the following:
Read all instructions carefully before use.
Keep children and unauthorized persons away from the machine when in use.
Do not leave the key in the switch when not in use.
Do not operate the machine if it malfunctions or is damaged in any way. Contact an authorized service
agent for repair or adjustment.
Do not operate the machine when connected to the electrical supply.
The key of the operating switch must be removed before cleaning or doing maintenance on the
machine.
To unplug, pull the plug and not the cord.
The battery charging lead needs to be regularly inspected for signs of damage. If the lead is damaged,
it has to be replaced.
When recharging, make sure the area is ventilated.
Do not use where hazardous dust is present.
Do not use in near flammable areas.
Be careful when using the machine near stairways.
Guidelines for the Operator
Operators must be fully trained in the use of the machine in accordance with these instructions, able to
perform user maintenance and the correct selection of accessories.
Operators should be physically capable to move, transport and operate the machine.
Operators should be able to recognize unusual operation of the machine and report any problems.
Keep hands and feet clear of the rotating pad.
Wear suitable footwear and clothing.
Where possible, implement job rotation and adequate rest periods for the operator(s).
Do not smoke when using the machine.
This machine is for indoor use only. Do not store outdoors or in wet areas.
4