Create Speaker Fire Manual De Instrucciones página 9

6. Before turning on the appliance, remove any excess bioethanol that
may remain.
7. Light the burner with a stick lighter. Do not lean over the tabletop
fireplace during lighting and maintain a sufficient safety distance.
O N/ OFF
8. Place the tempered glass cover on the base.
9. The fuel will burn little at first. Wait 5 minutes until the flame has
reached the optimal height.
EXTINCTION/SHUTDOWN
1. Let the fireplace burn until the bioethanol in the burner
is completely used and the flame goes out on its own.
2. If you want to extinguish the flame beforehand, use the
extinguishing hook next to the fire cover, smothering
the fire with the round surface. Leave it there for about
10 seconds.
3. Remove the extinguishing hook next to the fire cover
and check carefully and with sufficient safety distance
that the fire has been extinguished correctly.
HOW TO USE
• Press and hold the power button
voice prompt "Bluetooth".
• The speaker will enter Bluetooth mode by default. At this
point you can pair the speaker to your device.
• Press and hold the power button
and the speaker will turn off. An acoustic signal will sound,
this will indicate that the speaker has been turned off.
and you will hear the
while the speaker is on
E NGLI SH 9