Publicidad
Enlaces rápidos
ASME A112.18.1 / CSA B125.1
Model/Modelo/Modèle
4353-DST
Series/Series/Seria
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
WARNING: THIS FAUCET IS NOT TO BE USED WITH PORTABLE
DISHWASHERS! / ADVERTENCIA: ¡SESTA LLAVE NO SE DEBE UTILIZAR
CON MAQUINAS LAVAPLATOS PORTATILES! / AVERTISSEMENT: ON NE
DOIT PAS BRANCHER UN LAVE-VAISSELE PORTATIF SUR CE ROBINET!
MEETS OR EXCEEDS — ASME A112.18.1 / CSA B125.1
ALCANZA O EXCEDE LAS SIGIENTES NORMAS —
ASME A112.18.1 / CSA B125.1
LE ROBINET EST CONFORME OU SUPèRIEUR AUX EXIGENCES DES
NORMES SUIVANTES: ASME A112.18.1 / CSA B125.1
For easy installation of your Delta
faucet you will need:
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and maintenance
information.
Para instalación fácil de su llave Delta
usted necesitará:
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
Pour installer votre robinet Delta
facilement, vous devez:
• LIRE TOUTES les instructions avant de débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien.
SINGLE HANDLE PULLOUT KITCHEN FAUCETS
60960
LLAVES EXTRAÍBLES DE AGUA PARA COCINAS
ROBINETS À UNE MANETTE À BEC-DOUCHETTE
RÉTRACTABLE POUR ÉVIERS DE CUISINE
60960
1
You may need/Usted puede necesitar/
Articles dont vous pouvez avoir besoin:
T E FLO N
1/8"
3/15/10
Rev. C
Publicidad
Manuales relacionados para Delta 4353-SD-DST
Resumen de contenidos para Delta 4353-SD-DST
- Página 1 • To READ ALL the instructions completely before beginning. • To READ ALL warnings, care, and maintenance information. Para instalación fácil de su llave Delta usted necesitará: • LEER TODAS las instrucciones completamente antes de empezar. • LEER TODOS los avisos, cuidados, e información de mantenimiento.
- Página 2 & repair. OF MERCHANTABILITY. Delta will replace, FREE OF CHARGE, during the warranty period, any part or finish that proves This warranty excludes all industrial, commercial & business usage, whose purchasers are defective in material and/or workmanship under normal installation, use & service. Replacement hereby extended a five year limited warranty from the date of purchase, with all other terms of parts may be obtained by calling 1-800-345-DELTA (in the U.S.
- Página 3 Faucet Installation Faucet Installation DECK MOUNT STYLE CENTER MOUNT STYLE Install round escutcheon (1) Secure to sink with mounting Place baseplate shanks (1) through Secure faucet to sink with mounting mounting holes in deck. Option: If sink is onto faucet (2). Insert faucet nut and washer (1).
- Página 4 Hose Installation Pass hose (1) through faucet (2). Thread wand Push hose end (1) onto faucet outlet (2). Attach clip (3) over hoses as shown. Pull down moderately to assembly (3) onto hose (1) to prevent it from becoming ensure connection has been made. lodged in faucet when installing weight (4).
- Página 5 Loop tubing created. Delta is not responsible for tubing that is l Tubing is cut too short: buy a coupling union and a (2) if it is too long. Note: Recommended tubing...
- Página 6 Correct method Incorrect Installation Instalación Incorrecta Método Correcto Installation Incorrecte Bonne méthode Do not install sleeve Ensure cut is straight. upside down. No instale la manga Asegúrese que el corte Custom Fit Connections - Plastic Sleeve Installation Instructions boca abajo. esté...
- Página 7 Soap Dispenser Installation Turn on hot and cold water supplies Reinstall the spray wand. Check all Remove nut (1). Separate head (2) from body (3). Insert body (3) (1). Pull the hose assembly (2) out connections at arrows for leaks. and gasket (4) through selected hole in sink.
- Página 8 Setting The Handle Limit Stop (Optional) because it limits the amount of hot water in the mix; however, this handle limit stop This faucet includes an integrated handle limit stop that has two positions. Position will not always prevent scalding because it does not compensate for incoming 1, to the left, allows full handle motion (the full range between “all cold”...
- Página 9 1/8" Maintenance Wand Operation Button 1 - Spray Mode If faucet leaks from under handle: * WARNING: Failure to securely tighten Button 2 - 1.5 gpm at 60 psi Maximum Aerator Remove handle and unthread trim cap (1). Using a bonnet nut with a wrench could result Button 3 - Standard Flow Aerator wrench, ensure bonnet nut (2) is tight.
- Página 10 RP60965▲ RP40650 Lever Handle Assembly Set Screw Manijas de Palanca Tornillo de Presión Manette Vis de calage RP60966▲ RP51502▲ Button / Botón / Bouton Casquillo Embase RP51503 Bonnet & V-Ring Bonete y Aro-V Chapeau et Joint à lèvres RP63263 RP50587 Adapters Valve Assembly 3/8"-24 UNEF to 1/2"-20 UN &...
- Página 11 Notes / Notas / Notes...
- Página 12 Notes / Notas / Notes...