Publicidad
Idiomas disponibles
Idiomas disponibles
batteries and 4 HR03/AAA
additional batteries in the
storage compartment
inside the lid. HR6/AA
storage slots can also fit
HR03/AAA batteries.
• Possible to wall mount the
charger by the two key
holes located on the back.
Operating instructions
• Connect the provided
power cord with charger
and plug it into the power
outlet.
• Insert the batteries
into the charging slots
according to the polarity
indications (+/-)
• The LED indicator status:
White LED pulsing on:
Charging in progress
White LED steady on:
Charging complete
Red LED flashing: Error -
inserted batteries are non-
rechargeable, damaged,
have too high temperature
or the batteries are not
connected in accordance
with polarity indications.
• The charger must be
connected to power outlet
for the trickle charging to
work during storage.
• Disconnect the charger
from the power outlet
before cleaning or when it
is not used.
Good to know
• Brand new batteries need
2 to 3 times of charging
and usage cycles to
optimize the battery
performance.
• It is normal for batteries
to become hot during
charging and they will
gradually cool down after
charging is finished.
• Charging time may vary
based on different battery
capacities, remaining
charge, battery age
and temperature in the
surrounding area.
• Charger operating
temperature: 0°C to 40°C.
5
Publicidad
