Publicidad
Maintenance
Service
• Tool servicing should only be performed at an
Authorized TRUPER Service Center. Service and
maintenance performed by unqualified persons can be
dangerous and may cause personal injury as well as
voiding the product warranty.
• When servicing a vacuum cleaner, request the use of
genuine replacement parts. The use of unauthorized
parts, or failure to provide proper maintenance, can pose
a risk of electric shock or injury.
Dust compartment cleaning
CAUTION
• This machine is designed with cyclonic
technology and does not use a dust bag filter.
• Always keep the dust compartment clean before each
operation.
• If necessary, the dust compartment can be washed with
water and soap.
1. Press the lock button.
2. Hold the handle and push forward to remove the dust
compartment.
3. Press the bottom lid lock to empty the dust from the
container.
4. Close the lower lid and properly place the dustbin back
in position, ensuring the button is locked.
CAUTION
When you notice a decrease in suction
power, check if the dust compartment is full and empty it.
Bottom lid lock
Carbon brush replacement
• Carbon brushes should be periodically inspected and
always replaced by an Authorized TRUPER Service Center
when worn out.
• After replacement, request an inspection to ensure the
new carbon brushes can move freely in the brush holder
and ask for the tool to be turned on for 5 minutes to pair
the contact of the brushes and the switch.
• Only genuine TRUPER brand replacement carbon
brushes should be used, specifically designed with the
appropriate hardness and electrical resistance for each
type of motor. Out-of-specification carbon brushes can
damage the motor.
• Whenever carbon brush replacement is required, both
carbon brushes must be replaced.
1
3
2
4
9
ENGLISH
Publicidad
