Publicidad
Idiomas disponibles
Idiomas disponibles
M a n u a l
I n p u t S AT
In the case of the CAD-814 we also have a SAT Input, where the LNB power
supply and/or the attenuation of the signal can be set.
Press
to enter.
In pu t SAT
LN B
In the LNB setting we can set if the LNB is powered from the amplifi er, or not,
or let the current pass through.
Press
to accept and select between available voltages with
If we want to let the current pass through, select Bypass.
Press
if you want to go back to the Manual menu.
In pu t SAT
At te n
In order to adjust the SAT Attenuation press
Adjust the attenuation using
Once adjusted, press
Press
if you want to go back to the Manual menu.
M a n u a l
O u t p u t
In this setting we will adjust the amplifi er output. We can confi gure the output
level, the UHF slope and the BIII attenuation.
Press
to enter.
MULTIBAND AMPLIFIERS
0V
0d B
or
. The adjust range is from 0 to 20dB.
to confi rm.
to select the setting.
ENG - 27
or
.
Publicidad
