SHANQIU FX 5-12Pro-AC Manual De Instrucciones página 5

<2> Output, when use this mini UPS, please DO check the voltage and current that required by
the loading device before plug into the output ports, make sure that the voltage and current are
suitable for your devices.
This mini UPS offers 4 ports of DC output and 1 port for USB output as below:
Port ①②: 5V USB, 5V DC, these two ports share 3A current in total.
Port ③: 9V DC, this port provides 9V/3A DC output.
Port ④⑤: 12V DC, these two ports share 5A current in total, that means, if connected 1
device, it can reach maximum 5A current, if connected 2 devices at the same time, please make
sure the total current required doesnot exceed 5A.
please be noted the compatiblity of current, the output interfaces of this mini UPS will detect the
current required by the loading device and provide the appropriate current to the loading device
automatically.
for example, Port ③: 9V 3A DC,
this port can support 9V voltage at any current below 3.0A.
9V / 0.5A, 1A, 1.5A, 2A, 2.5A, 3A are all supported by this port.
<3> Overloading
The maximum output power of this mini UPS is 60W. if the loading devices are more than 60W,
it will active overloading self-protection. (see 5. if it's happened)
How to calculate the used power, (P=UI), power=voltage × current
a 5V/3A USB output will take 5V × 3A = 15W.
a 5V/3A DC output will take 5V × 3A = 15W.
a 9V/3A DC output will take 9V × 3A = 27W.
a 12V/2A DC output will take 12V × 2A = 24W.