LF allen + roth RIAN 48WW Instrucciones De Montaje página 6

ASSEMBLY INSTRUCTIONS
1. Remove the countertop (A) from its vanity base and place it on a
protective covering on the floor to avoid any damage/scratches to the
countertop (A) or floor. Remove the protective foam from the vanity
base as illustrated.
2. Apply silicone lines onto the vanity's top where the countertop (A)
will be placed. Place the countertop (A) on top of the vanity. (Allow it
dry for 24 hours)
3. Wipe off the area on the top of the countertop (A) where the
backsplash (B) will sit using a clean cloth. Apply a line of silicone onto
the unfinished bottom side of the backsplash (B). Align the backsplash
(B) with the back edge. Slowly lower it onto the countertop (A) and
gently press to adhere. (Allow it dry for 24 hours)
1
A
2
A
3
B
A
Apply silicone onto the unfinished bottom side and rotate it to install.
24H!
PAGE 6