Arzum OKKA RICH SPIN PRO Manual De Uso página 37

EN
7. BREWING (For Hot Choco Mode)
In Hot Choco mode, it is recommended to use 20 g dark/milk tablet
chocolate and 200 ml milk.
1. Plug in your appliance.
2. Press and hold the On/Off button (rotary knob) on the panel.
Note: Pay attention not to exceed
water-milk-sugar mixture or milk mixture
beyond the 200 ML level line in the
coffee pot as the size of cups you are
using may differ.
3. Insert the coffee pot into the machine.
Note: If the Coffee pot is not in the place
or not place in its slot, all LEDs on the
control panel will remain off but coffee
pot is not in the place warning light and
ambient lighting will continue to light
4. Turn the rotary knob to select the Hot Choco mode( ) and press.
and press.
5. When any brewing mode is selected, a beep will sound and only the
blue led for the selected brewing mode will remain on and the brewing
process will start.
6. After brewing process has finished, your appliance will give warning
beep for 5 seconds and the LED light and ambient lighting for the
selected brewing mode will flash.
7. After brewing process has finished, you can serve your beverage by
pouring into the cup.
8. If you displace the coffee pot before the brewing process is over,
the red colored warning light that coffee pot is not in its place and all
function lights will flash and your appliance will give a warning sound
and finish the brewing process.
If the coffee pot is put back after being removed, the brewing process
will not continue.
ARZUM OKKA RICH SPIN PRO 37