Publicidad
Idiomas disponibles
Idiomas disponibles
7. After the warming process is over, pour the milk into a glass and serve.
8. If you displace the coffee pot before the warming process is over,
the red colored warning light that coffee pot is not in its place and all
function lights will flash and your appliance will give a warning sound
and finish the warming process.
If the coffee pot is put back after being removed, the warming process
will not continue.
10. MILK FROTHING (Hot or Cold)
1. Plug in your appliance.
2. Press and hold the On/Off button (rotary knob) on the panel.
Note: Pay attention not to exceed amount of milk beyond the 120 ML
level line in the coffee pot as the size of cups you are using may differ.
3. Insert the coffee pot into the machine.
Note: If the Coffee pot is not in the place or not place in its slot, all LEDs
on the control panel will remain off but coffee pot is not in the place
warning light and ambient lighting will continue to light
4. For cold milk frothing;
Turn the rotary knob to select the Cold Milk Frothing mode (
) and
press.
For hot milk frothing;
Turn the rotary knob to select the Hot Milk Frothing mode (
) and
press.
5. When any brewing mode is selected, a beep will sound and only the
blue led for the selected brewing mode will remain on and the brewing
process will start.
6. After warming process has finished, your appliance will give warning
beep for 5 seconds and the LED light and ambient lighting for the
selected brewing mode will flash.
40
ARZUM OKKA RICH SPIN PRO
Publicidad
