Verifications - BH Easy motion STAND UP Manual Del Usuario

2º How to move the vehicle through the throttle:
STAND UP is provided with a throttle (6) set to the right grip in order to initiate
the move of the vehicle. If one turns opposite to the clock hands, the engine is
to speed, if one turns to the clock hands, the engine is to brake. It is provided of
two shifters: one short and one long (2) to be used according to ones
requirements.
.
3º How to stop or decrease the speed:
If one uses the brake lever (1), the engine assistance and the transmission are
to be interrupted so one shall grip the brake lever to stop the vehicle.
Remember that the STAND UP is only provided with a front wheel brake.
Remember that the brake, for safety, works on the electric system,
cutting the engine current.
Important: Before using the vehicle please see the section:
"VERIFICATIONS" Y "SAFETY"

7. VERIFICATIONS

Check before riding for the first time
The vehicle has been verified at the BH factory before to be on sale,
Nevertheless, one should check the following components to be securely
fastened before riding the STAND UP for the first time:
• Correct position of the front brake: lever, cable and disc.
• Correct tight of the wheel nuts.
• Correct pressure of the tires.
• Correct wheels align.
• Correct folding security system.
• Correct tight of the quick-fastening clamps.