Publicidad
Idiomas disponibles
Idiomas disponibles
IF POLE OVERHANG DISTANCE IS 18" OR LESS:
1. If distance is between 0" to 10.5", install Short Pole Brace (2a) into Pole Support Brace (21). Fasten using M6x25 Bolt (13).
Secure with Lock Nut (8).
If distance is 10.5" to 18", install Medium Pole Brace (2b) into Pole Support Brace (21). Fasten using M6x25 Bolt (13).
Secure with Lock Nut (8).
2. Install completed brace into bottom support tube. Thread Male T-Handle (6) into L-Bracket (12) to secure pole in place.
21
8
21
13
8
IF POLE OVERHANG DISTANCE IS GREATER THAN 18":
1. Slide Main Pole Support (20) between tabs on L-Bracket (12) until holes lines up.
2. Fasten Main Pole Support (20) to L-Bracket (12) using M6x35 Bolt (9). Secure with Lock Nut (8).
3. Thread Male T-Handle (6) into Main Pole Support (20).
20
6
NOTE : Tighten bolt on Main Pole Support (20) so that it will stay in the up position on its own when in the storage position
(see storage section of manual page 18).
13
2a
2b
12
8
9
6
12
16
Publicidad
