Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
CD-MP3 PLAYER OPERATION
PLAYBACK
1. Switch on the appliance and press the FUNC button (17) on the remote control several times until DISC appears on the display.
If there is no disc, the indication "NO" will appear on the display;
2. Open the CD compartment (8) by pressing the OPEN/CLOSE button (29) on the remote control and insert the disc with the
written side facing up. Gently close the compartment;
3. After a few seconds the display will show the number of tracks on the disc and music playback will start automatically;
4. Press the button (19) on the remote control again to activate the pause. Press it again to start normal playback;
5. Press the button
(22) on the remote control to stop playback permanently.
JUMP TRACE AND QUICK SEARCH
1. Press : (4) and 9 (3) on the unit, or the : (26) and 9 (20) buttons on the remote control to move to the previous or next
track;
2. Press and hold : (4) and 9 (3) on the unit, or the : (26) and 9 (20) buttons on the remote control during playback to
quickly search a particular musical passage. Release the button to return to normal playback.
REPEAT
• Press the RPT button (16) on the remote control until the flashing repeat symbol appears on the display to play the same track
continuously.
• Press the RPT button (16) on the remote control until the solid repeat symbol appears on the display to continuously play all
tracks.
ALBUM FUNCTION
NOTE: function valid only for MP3 CDs containing folders.
1. When playing an MP3 CD or USB with multiple folders, press the FOLD+ (28) and FOLD-(27) buttons to select the folder you
want to play.
PROGRAMMING
You can select the order in which the tracks are played.
1. Press the button
(22) on the remote control to stop playback;
2. Press the PROG button (24) on the remote control, the message P01 appears on the display;
3. Select the track you want to play first with the keys
control;
4. Press the PROG button (24) on the remote control to confirm;
5. Repeat steps 3 and 4 to store and play the songs you want; for audio CDs a maximum of 20 tracks can be stored, while for
MP3/USB CDs a maximum of 99 tracks can be stored;
6. Press the
VOLUME/ control (6) on the unit, or the (19) on the remote control to start
7. Press the button
(22) on the remote control twice to cancel programming.
USB INPUT OPERATION
1. Connect a USB memory device to the USB (9) input;
2. Switch On the appliance and press the FUNC button (17) on the remote control several times until the USB indication appears
on the display, in the absence of the USB device, the display will show "NO";
Note: The device may not support some USB devices, this is due to the incompatibility of some processors.
3. For the rest of the functions, refer to the paragraph "CD-MP3 PLAYER OPERATION".
INPUT LINE IN
1. Switch On the device and press several times FUNC button (17) on the remote control until the AUXIN indication appears on
the display;
2. Connect any unit with audio output through the appropriate cable to the LINE IN (11) input;
3. Command the external unit from its commands;
4. Adjust the volume using the control (6) on the appliance or using the VOL +/- keys (25) on the remote control.
: (4) and 9 (3) on the unit, or the keys : (26) and 9 (20) on the remote
HCX 10F6
playback;
11
Publicidad
