Kobalt SGY-AIR294 Manual Del Usuario página 13

CARE AND MAINTENANCE
3. Fill the Paint Cup (B) about 1/4 inch full of
cleaning solution. Put the Cup Lid (C) back on
and spray the entire contents out into a
secondary container.
4. Remove the Paint Cup (B) from the Spray Gun
by turning counterclockwise, using the wrench (L)
(19 mm), and place it in the secondary container
to soak 3 - 5 minutes.
NOTE: You will need to add additional cleaning
solution to the container.
5. Unscrew the Air Cap (D) and Air Cap Ring (E) by
hand turning counterclockwise and place it in the
secondary container to soak.
6. Unscrew the Fluid Adjustment Knob (G) by
turning counterclockwise, using a damp cloth
with cleaning solution on it, wipe off the fluid
adjustment knob and set it aside.
3
Load cleaner
B
4
5
E
D
Counter-
clockwise
6
13
C
B
Counterclockwise
G