Model
Specifications
VESA standard: 200 x
UVM-4200
200 mm and 400 x 200 mm
(7.87 x 7.87 in. and 15.75 x
7.87 in.)
Screw thread: M5 screw
Length: 10.0 mm
Troubleshooting
Symptom
Check
Adjust
Picture is jittery
position and adjust Clock
value carefully until a noise is
no longer displayed.
No picture
Check if the power switch and
computer power switch are in
the On position
Check if the signal cable is
correctly connected to the
video card.
Check if the pins of D sub-
connector are not bent.
Check if the computer is in the
power- saving mode.
POWER LED is
Check if power switch is in the
not lit
On position.
Check if the power cord is
correctly connected.
Image is
Check if the signal cable is
Specifications
UVM-2600 / UVM-3200 models
Items
Panel
Screen size
Pixel pitch
View angle (H/V)
Contrast ratio
Response time
Brightness
Recommended
resolution
EN 10
Clock
to set the screen
UVM-2600 model
26 in. (66 cm)
0.4215 x 0.4215 mm
178°/178°
3000:1 (typ)
6.5 ms (G-to-G)
450 cd/m² (typ)
1366 x 768 @ 60 Hz
Symptom
Check
unstable
suitable for the video card.
Adjust
Image is not
to get the proper image.
centered, too
small or too
large
Picture bounces
Keep devices that may cause
or a wave
electrical interference away
pattern is
from the monitor.
present in the
See the FCC information at
picture
the front cover of the manual.
Adjust
Picture is blurred
Brightness.
Low sound
Adjust the volume on the OSD
menu.
Adjust the volume of the
sound card in the computer.
VIDEO screen
Check if PICTURE mode has
cannot be seen
been set.
Check if the video terminal is
properly connected.
Check if the video cable is
No video
correctly connected to the
computer and set to
Functions
picture menu.
Adjust the
Poor color in the
values on the OSD Picture
video
menu.
Adjust the
Grainy picture in
OSD Picture menu.
the video
UVM-3200 model
32 in. (81.3 cm)
0.36375 x 0.36375 mm
178°/178°
5000:1 (typ)
6.5 ms (G-to-G)
450 cd/m² (typ)
1920 x 1080 @ 60 Hz
Clock
or
H&V Center
Contrast
and
on the OSD
Color
or
Tint
Sharpness
on the
User Manual