Changing A Monitor Parameter; Hot Keys - Interlogix UVM-2600 Manual De Usuario

from sub Menu to top menu in the OSD
window.
R11 / R17 UP/DOWN
Press UP/DOWN button to enter the
Function menu.
R12 / R14 LEFT/RIGHT
Press LEFT/RIGHT Button to adjust the
volume.
R13 OK
Select menu items. R15 VOL +/-
Adjust the sound level.
R16 PR +/-
Not used.
R18 PC
Directly select PC mode.
R19 S.MODE
Choose a different preset sound mode
or your own customized sound.
R20 AUTO
Choose automatically the correct
horizontal Position and vertical position
as well as the size of the screen image.
(PC mode only)
R21
Not used.
R22 POSITION
Select the position of PIP display.
R23 ZOOM
Select the screen format (CAM/HDMI
mode only).
R24 SIZE
Select the size of PIP display.
R25 SKIP
Not used.
R26 PIP
Activate or cancel the PIP function.
R27 S. SWAP
Change the sound source of the main
or sub display.
R28 SOURCE
Select the signal source of the sub
display.
EN 4
 
/ Button
 
/ Button
R29 P. SWAP
Change the picture of the main or sub
display.
R30, R31, R32, R33
Not used.
Inserting batteries into the remote
control unit
Open the battery compartment of the remote
control. Insert the batteries (two 1.5 V type
R03 or AAA). Make sure that the polarity
matches with the (+) and (-) marks inside of
the battery compartment.
Note: To avoid damage from possible battery
leakage, remove the batteries if you do not
plan to use the remote control handset for an
extended period of time.
Changing a monitor
parameter
1. Press the MENU
panel to obtain the OSD menu screen.
2. Use Left-Right buttons to select the
menu.
3. Use Down button to select the
submenus.
4. Use Up-Down buttons to select a
submenu function.
5. Press SOURCE
right buttons you can make adjustments
as necessary
6. To exit press, MENU.

Hot keys

Selects signal in order. VGA -
HDMI - CAM

When there is no OSD, if you
press this ▲ (UP/AUTO)
button, you can use the best
display performance fit for a
current mode

When there is no OSD, you
can adjust the volume directly
button on the front
button, then using left-
User Manual