Control Panel Features - Whirlpool 3DWED4800YQ2 Manual De Uso Y Cuidado

CONTROL PANEL & FEATURES
A|R DRY
TIMED DRY 70 O
Heavy
Dry
o
AUTOMATIC
DRY
Very Dry
Less Dry
Cool
_ediutn
_- TEMPERATURE
fabric
WRINKLE SHIELD
6 o4 Cycle Si9
Od
_PUSH TO START
_! TEMPERA'_ URE
f:_brc
_PUSH TO START
Not all features and options are available on all models.
Appearance may vary.
O
DRYER CYCLE KNOB
Use your Dryer Cycle knob to select available cycles on
your dryer. Turn the knob to select a cycle for your laundry
load. See "Cycle Guide" for detailed descriptions of cycles.
TIMED DRY
Will run the dryer for the specified time on the control.
On models with a selectable temperature knob, you may
choose a setting based on the fabrics in your load. Drying
time and temperature will depend on your dryer model.
AUTOMATIC DRY
Senses moisture in the load or air temperature and shuts
off when the load reaches the selected dryness level.
Gives the best drying in the shortest time. Drying time will
vary based on fabric type, load size, and dryness setting
TEMPERATURE / FABRIC
Select a drying temperature based on the fabrics in your
load. If you are unsure of the temperature to select for a
load, select the lower setting rather than the higher setting.
O
O
WRINKLE SHIELD OPTION (on some models}
When you are unable to remove a load of clothes from the
dryer as soon as it stops, wrinkles can form. The WRINKLE
SHIELD option periodically tumbles, rearranges, and fluffs
the load to help keep wrinkles from forming.
[] To get heat-free, periodic tumbling at the end of a
cycle, turn the WRINKLE SHIELD knob to ON or OFF
at any time before the cycle has ended.
NOTE: This option is available only on Automatic
Cycles.
END OF CYCLE SIGNAL/PUSH TO START
The End of Cycle Signal produces an audible sound when
the drying cycle is finished. Promptly removing clothes at
the end of the cycle reduces wrinkling.
Turn the END OF CYCLE SIGNAL knob to select the
desired setting (On or Off). Press the PUSH to START
knob to start the dryer.