GE GFT14 Manual Del Propietario E Instrucciones De Instalación página 7

Getting started
Delay Dry
I
Delay
Use to delay the start of your dryer.
Dry
1. Choose your dry cycle and any options.
2. Press Delay Dry. You can change the delay time in 1 hour increments, using the Delay Dry
3. Press the Start/Pause button to start the countdown.
NOTE: If the door is opened while the dryer is in Delay Dry, the countdown time will not
restart unless the door is closed and Start/Pause button has been pressed again.
Start/Pause
J
Start
Press to start a cycle. If the dryer is running, pressing it once will pause the dryer and unlock
the door. This function can be used to add garments during a cycle. Press again to restart
Pause
the cycle.
NOTE: If the dryer is paused and the cycle is not restarted within 15 minutes, the current
cycle will be cancelled.
Lock
K
Temp Level
You can lock the controls to prevent any selections from being made. Or you can lock or
unlock the controls after you have started a cycle.
Children cannot accidentally start the dryer by touching pads with this option selected.
To lock the dryer, press and hold the Temp and Level buttons together for 3 seconds.
To unlock the dryer controls, press and hold the Temp and Level buttons together for 3
seconds. A sound is made to indicate the lock/unlock status.
The control lock icon on the display will light up when it is on.
NOTE: The Power button can still be used when the machine is locked.
Signal
L
Damp
Timed
When the light is on, the dryer will beep at the end of the cycle and every time you press a
Alert Dry
button on the control panel.
To turn the signal off, press and hold the Damp Alert and Timed Dry buttons together for 3
seconds. A sound is made to indicate the lock/unlock status.
Display and Status Lights
M
DRY DAMP COOL
The display shows the approximate time remaining until the end of the cycle.
High Ex Dry Clean Filter Est Time Remaining
Medium Empty Tank
Low Dry
In addition, this display will show the dryer status:
Delay
No Heat Damp Damp Timed Damp
My Cycle Tumble
49-90571-1
button.
Status
DRY DAMP
Controls locked on.
End of cycle signal on.
Clean Filter Time to clean the filter. See the Care and Cleaning section.
Empty Tank Time to empty the water tank. See the Care and Cleaning section.
Temp Shows High, Medium, Low or No Heat temperature setting selected.
Level Shows Extra Dry, Dry or Damp dryness setting selected.
Damp Alert Indicates Damp Alert is set and will sound when the clothes have dried to a damp
dryness level.
Timed Indicates that a Timed Dry cycle is set. Will turn off after cycle is finished.
Est Time
Display shows the estimated time remaining until set cycle is completed.
Remaining
My Cycle Indicates the My Cycle feature is set.
Ext Tumble Indicates the Extended Tumble feature is set.
Indicates Delay Dry is set time is selected.
COOL
7