Krups EA816 Manual Del Usuario página 14

TABLE OF MEANINGS OF KEYS AND BUTTONS
TABLE OF MEANINGS OF KEYS AND BUTTONS
"On-off" button
Favourite coffee type button or press
Save favourite button or press and hold
Steam drink button
Maintenance and settings button
Symbols Constant Flashing
2
22
Buttons and knobs
Navigation button (cursor key)
To adjust selected settings
Start or stop equipment
To adjust how finely ground you would
like the coffee beans.
Meaning
The coffee grounds collector is missing or improperly positioned
Empty the coffee grounds collector + empty the drip tray
Refill the water tank
The water tank is not properly in place
Place a container (0.6 L minimum) under the steam and coffee jets
Maintenance cycle in progress
Malfunction: unplug the machine for ten seconds then plug it back in
Install filter cartridge
Rinsing cycle in progress
Clean machine with KRUPS cleaning tablet
Cleaning cycle interrupted
Descale machine with KRUPS descaling sachet
Descaling cycle interrupted
Adjust the water hardness
Enable automatic rinsing of the coffee circuit when the machine starts.
Program the length of time after which your machine switches off
automatically (standby)
Adjust the coffee temperature/Pre-heating indicator
Favourite A or B - 2 drinks can be saved in memory
Registering favourite A or B
Preparation progress indicator
Press the START-STOP button
Coffee strength indicator
Volume or time indicator
Number of cups (1 or 2)
Active use indicator
Maintenance or settings selection
APPLIANCE DESCRIPTION
A. Water tank lid
B. Water tank
C. Used grounds collector
D. Coffee outlet and height-adjustable handle
E. Grid and removable drip tray
F. Coffee bean container lid
Coffee bean container
G. Coffee grounds fineness adjustment knob
H. Metal grinder
I. Cleaning tablet funnel
J. Cup grid (may vary according to model)
BEVERAGE PREPARATION
Number of
TYPES OF COFFEE
possible cups
1
RISTRETTO
2 x 1
1
ESPRESSO
2 x 1
1
COFFEE
2 x 1
BEVERAGE PREPARATION
Appliance preparation
■ To prevent used water spillage from making your work surface dirty and to avoid burning yourself, don't forget to
attach the drip tray.
■ Remove and refill the water tank (1-2).
■ Refill the coffee bean container (3).
First use
■ Turn on the appliance by plugging it in then pressing the on/off button
■ The machine pre-heats. At the end of the cycle, the symbols
■ Put a 0.6L container underneath the two coffee and steam nozzles.
■ Press the start/stop button
(5). The machine starts and rinses the hydraulic circuits (coffee and steam) for around
2 minutes. At the end of the initialisation cycle, the coffee types menu appears. (6)
■ You are advised to rinse the circuit if you have not used your machine for several days (see the chapter on Maintaining
Your Appliance).
K. Water level float
Graphic screen
L. On/off button
M. Coffee and favourites button
N. Steam button
O. Settings button
P. Navigation button
Q. + or - button
R. Start/stop button
S. Steam nozzle
Possible settings Possible settings
Volume (ml) Strength
20 to 30 ml (per 10 ml)
1 to 3 beans
2 x 20 to 30 ml (per 10 ml)
In two cycles
30 to 70 ml (per 10 ml)
1 to 3 beans
2 x 30 to 70 ml (per 10 ml)
In two cycles
80 to 180 ml (per 10 ml)
2 x 80 to 180 ml
1 to 3 beans
(per 10 ml)
In two cycles
(4).
and start button start to flash.
23