Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLING THE BIDET ATTACHMENT (cont.)
5 . Install Adjustable Mounting Brackets into the bidet
attachment
a . Line up the dots of one of the adjustable
mounting brackets with the dots around one of
the open mounting bracket holders .
b . Push the bracket into the bracket holder until it
snaps into place .
c . Repeat Steps 1 and 2 to install the other
adjustable mounting bracket .
6 . Install Bidet Attachment on Toilet .
a . Place bidet attachment on the toilet so the nozzle
is as close to the back of the toilet bowl as it will
go . This will vary by toilet .
b . Make sure the adjustable brackets line up with
the holes in the toilet fixture . You may need to
rotate the adjustable brackets accordingly to line
up properly .
c . Replace the toilet seat on top of bidet attachment
and secure using original toilet seat hardware .
Make sure to tighten so that the bidet attachment
and seat do not move .
d . Ensure the control knob is lying flat and isn't
turned to one of the operating positions to
prevent water from accidentally spraying out of
the toilet bowl .
Step 6a
Step 6b
Step 6c
7
Publicidad
