Motorola ROKR 600 Guia De Inicio Rapido página 4

When the speaker is powered off, no LEDs light up. Plug the
cable into the USB-C charging port. The LED indicator flashes
orange during charging the battery. When fully charged, it
lights up orange for 10 seconds and turns off.
3. Pair your speaker
1. Press and hold
automatically enter pairing mode if the unit has not paired
with Bluetooth before.
2. If the unit has previous paired with other bluetooth device,
press and hold
when entering pairing mode.
3. Select ROKR 600 from the Bluetooth menu of your device.
When connected successfully,
hear a musical tone.
4. Enable speakers' broadcast mode
To achieve broadcast mode, you will need at least two
speakers.
1. After you pair your first speaker with your device and
connected, this would be the primary speaker.
2. Please keep this connecting with the device. Press
to enable this to broadcast mode. When the primary
speaker go to broadcast mode, the blue LED will flash in a
pattern of 2.5s on, 0.5s off, 0.5s on and 0.5s off.
3. Power up the 2nd speaker (secondary) by press
Make sure this speaker is not connecting to any device.
4
for 2s to turn on your speaker. It will
O
for 3s. The LED indicator flashes blue fast
B
becomes white. You will
B
ROKR 600
once
B
for 2s.
O