Buffalo CR904 Manual De Instrucciones página 2

EN
Safety Instructions
• Position on a flat, stable surface.
• A service agent/qualified technician should carry out
installation and any repairs if required. Do not remove any
components on this product.
• Consult Local and National Standards to comply with the
following:
- Health and Safety at Work Legislation
- BS EN Codes of Practice
- Fire Precautions
- IEE Wiring Regulations
- Building Regulations
• Warning! Hot surface! Always wear safety gloves
when placing or removing foods.
• DO NOT immerse the appliance in water, or use jet/pressure
washers to clean the appliance.
• DO NOT overfill the appliance. Keep the water level below the
'Max' level.
• DO NOT allow the water level to drop below the 'Min' level
during operation.
• DO NOT move the appliance when it contains hot liquid.
• Do not use the appliance for anything other than its intended
use.
• Always switch off and disconnect the power supply to the
appliance when not in use.
• Not suitable for outdoor use.
• Keep all packaging away from children. Dispose of the
packaging in accordance to the regulations of local authorities.
• If the power cord is damaged, it must be replaced by a Buffalo
agent or a recommended qualified technician in order to avoid
a hazard.
2
CR904_ML_A5_v3_20221025.indb 2 2022/10/25 11:59:57