Descargar Imprimir esta página

Buffalo CR904 Manual De Instrucciones página 4

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 27
EN
Operation
Storing Food
To get the best results from your Buffalo appliance,
follow these instructions:
The appliance is designed for keeping food
warm only, not for cooking. Always pre-cook
the food.
Only store foodstuffs in the appliance when it
has reached the correct operating temperature.
Use the spacer bars provided to fill any gaps
(they are not required to support each GN
pans).
Always cover the pan with lid when not in use.
Raise/Lower the glass cover
1. To raise the glass cover, unlock the buckles
at two sides first. The glass cover will rise
automatically. Then turn the screws clockwise
to tighten.
2. To lower the glass cover, loosen the screws
first. Then press down the glass cover on both
ends simultaneously. Finally lock the buckles in
place.
Buckle
Note: Do not place heavy
objects (e.g., stacked plates)
on the glass cover or folding
shelves. Use the fixed shelves
instead.
4
CR904_ML_A5_v3_20221025.indb 4
Screw
Glass cover
Filling the water tank
1. Fill the tank with water to a level between the
'Min' and 'Max' marks on the inside of the
tank.
Note: Never use the appliance
without water in the tank,
or the food will burn and the
appliance will overheat and may
get damaged.
2. Insert the 1/1 GN pans (not supplied) into the
water tank.
Control panel
The control panel is located at the rear of the
appliance.
Heating indicator light:
It is on when the appliance is heating.
It is off when the set temperature is
reached.
Up Button
Down Button
Light button
SET
Set button
I/O
Power switch
Turn On
1. Ensure the power switch is set to [O] and turn
on at the socket.
2. Switch on the Power [I].
Illumination
Press the light button
to switch ON/OFF the
lamp underneath the glass cover.
2022/10/25 11:59:57

Publicidad

loading