Switch On The Unit; Select Language - erkodent Erkopress 240 Manual Del Usuario

Main switch
The touchpanel responds in the framed function fields on slight pressure. For input the enclosed
brush is equipped with a rubber cap. However, input is also possible with fingers.
Basic display:
Select language, for any further use of the unit the language selected last time is used.

1. Select language

selection
Note:
The function field »X« inter-
rupts the respective process and
has to be confirmed.
Note:
If within 10 seconds the next required working step will not be performed, the working program will be
switched off for safety reasons.

Switch on the unit

Switch on the unit at the main switch.
The touchpanel first shows the Erkodent Logo and
then it requires to check if the sensor window is dusty
or dirty. If so, dust off or clean with a damp cloth.
The sensor window is located at the rear right in the
device.
After a few seconds the basic display automatically
appears.
2. Select language 3. Menu, selected
language
Note:
The function field »delete" has
to be confirmed.
6