Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
5. Starting and stopping the product
•
The battery-powered sprayer keeps fluid
continuously cycling through the tank to allow
pump-free spraying.
To start:
•
Press the On/Off power switch (D) to turn the
product ON.
To stop:
•
Press the On/Off power switch (D) to turn the
product OFF.
CARE AND MAINTENANCE
WARNING
Always depressurize the sprayer, remove all chemical solution, and clean the sprayer before making
repairs. Replacement parts may be purchased at the store where you bought the sprayer. For a list of
replacement parts refer to <Replacement parts>.
Cleaning and maintaining the product
After each use, clean the tank thoroughly. If spray solution remains, properly dispose it and drain the
tank completely. Follow recommendations from the chemical manufacturer for proper disposal of the
solution. Pumping causes air to be taken in, and the remaining liquid needs to be discharged. Pump
until all liquid and air are completely discharged through the nozzle. Refill the tank with a few quarts
of soapy water (a mild dish detergent is recommended) and discharge as previously instructed. If
necessary, repeat this procedure several times to ensure that the sprayer is clean. Sporadic spray
distribution is caused by a clogged nozzle. If necessary, remove and clean nozzle.
Maintenance and storage
After use, the sprayer should be properly cleaned and stored away from direct sunlight to prevent UV
damage. Before storing for the winter, be sure that all liquid is completely drained from the tank, lines
and air chamber. (Refer to the CLEANING AND MAINTAINING THE SPRAYER instructions above).
Regularly inspect hose, pump tank for water, damage or leaks.
5
D
17
Publicidad
