Pleasant Hearth HARBOUR 230-207-10 Instrucciones De Montaje página 5

ASSEMBLY INSTRUCTIONS
4. Install two Wood Dowels (CC) into the
unthreaded holes in the bottom of the Base
Panel (B). Align the unthreaded holes in the
Inside Panel (F) with the Wood Dowels (CC) in
the Base Panel (B) and push the parts together.
Attach the Inside Panel (F) by using two cam
locks (BB) as shown in the cam lock assembly
guide. Locate the five Legs (P) and screw them
into the threaded holes in the bottom of the Base
Panel (B).
5. Install two Wood Dowels (CC) into the
unthreaded holes in the bottom of the Top Panel
(A). Align the unthreaded holes in the Media
Partition (J) with the Wood Dowels (CC) in the
Top Panel (A) and push the parts together.
Attach the Top Panel (A) by using two Cam
Locks (BB) as shown in the cam lock assembly
guide.
6. Locate the Left Side Panel (D) and place it on
a soft surface to protect the finish. Insert four
Cam Bolts (AA) into the threaded holes in the
Top Panel (A). Fully tighten the Cam Bolts (AA)
with a screwdriver. Locate the Right Side Panel
(D) and place it on a soft surface to protect
the finish. Insert six Cam Bolts (AA) into the
threaded holes in the Base Panel (B). Fully
tighten the Cam Bolts (AA) with a screwdriver.
4
B
P
5
6
AA
5
F
CC
CC
BB
J
C
D
E
C
BB
A