Publicidad
Idiomas disponibles
Idiomas disponibles
• App Permissions and Bluetooth:
○ Open the app and agree to all the required permissions and function settings.
○ If Bluetooth is not active, you will be prompted to enable it. Select "OK to turn on Bluetoo-
th" or manually activate Bluetooth on your phone (iOS devices require manual activation).
• Starting the Product: Power on the product as usual.
• Connecting to the Device:
○ In the app, tap the "+" sign to access the "device scanning" interface and begin scanning.
○ After a short wait, the device's image and name will appear (as shown in Figure 2). Tap
on it to proceed to the interface shown in Figure 3.
○ In the Figure 3 interface, tap on the "connected" status to bring up the Figure 4 interface.
○ In the top right corner of the Figure 4 interface, select the group and channel (Grp:A ch:1)
that matches your product lamp.
○ Use the tabs at the top of the app to control and adjust the product settings.
○ To unpair the device, slide "connected" in Figure 3 to the left, revealing Figure 5. Tap
"delete" to remove the device.
○ For additional help, tap the "Help" option in each interface of the app for detailed instru-
ctions.
��
Note: If the device is not detected during scanning, ensure that the product is turned on
and the mobile phone's Bluetooth is enabled.
14
Publicidad
