EDIFIER R990BT Manual De Instrucciones

EN
1. EDIFIER ConneX app
With this app, you can
•Switch input modes,
•Control play,
•Select or customize EQs,
•Upgrade the firmware, and
•More functions.
Download EDIFIER ConneX app
1. With your smart device, scan the QR code on the quick start guide or the
packaging.
•You can also search for "EDIFIER ConneX" in Apple App Store (iOS devices) or
Google Play (Android devices).
2. Download and install the app.
How to use this app
1. Connect your smart device with the speaker via Bluetooth.
2. In Bluetooth mode, tap the icon of EDIFIER ConneX App on your smart device
to open it.
3. Tap the menu for settings and playback control.
2. What's in the box?
Speaker connecting cable
RCA-to-RCA audio cable
3.5mm-to-RCA audio cable
Power cable
Note:
•Images are for illustrative purposes only and may differ from the actual product.
•For the need of technical improvement and system upgrade, information and
specifications contained herein may be slightly different from actual product. If
any difference is found, the actual product prevails.
3. Cable connection
Note:
•Power input: 100-240V~ 50/60Hz
•This plug type is meant for illustration purpose only.
4. Power on/off
Press and hold the "
5. Bluetooth input
1. When the speaker is powered on for the first time, it will auto-enter Bluetooth
pairing mode (LED blinking in blue).
•You can also press the "
manually .
2. On your device, select "EDIFIER R990BT" in its Bluetooth device list to connect,
and the blue LED will be steady lit when the connection is established.
•To disconnect from the current Bluetooth device, press and hold the " " button
for 1.5 seconds.
Note:
•Pin code for connection is "0000" if needed.
•To enjoy all Bluetooth functions of this product, make sure that your audio
source device supports A2DP and AVRCP profiles.
•If no device is connected in 30 minutes, the speaker will switch to Bluetooth
hidden mode. The blue indicator will be in breathing. In this mode, (1) new
devices cannot find the speaker, but (2) for a device that exists in the pairing
record of this speaker, you can select "EDIFIER R990BT" from its Bluetooth
device list to reconnect. To exit from Bluetooth hidden mode, press the " "
button.
6. RCA input
1. Press the " " knob to switch to Line In 1 / Line In 2 mode.
2. Play audio and control the playback on your device.
Note:
In Line In 1 / Line In 2 mode, volume sync is not supported. To adjust the volume,
adjust on the speaker and your device separately.
7. Control
Button
Work mode /
Standby mode
Work mode
Work mode
Work mode
Bluetooth device
connected
Bluetooth hidden
mode
8. Indicator statuses
Indicator status
Blinking in blue per 0.2s
Breathing in blue
Solid blue
Blinking once and then in solid green
Blinking twice and then in solid green
Blinking in blue and green
9. Specifications
Total output power (RMS): 12W+12W (DRC on)
Frequency response: 60Hz-18kHz
Declaration for EU
Frequency Band: 2.402GHz ~ 2.480GHz
RF Power Output: ≤12 dBm (EIRP)
There is no restriction of use.
10. Troubleshooting
Cannot connect to your Bluetooth device
•Make sure that the distance between this product and your Bluetooth device
is less than 10 meters and there are no obstacles between them.
•Make sure that no device is connected to this product via Bluetooth.
•Make sure that this product is in Bluetooth pairing mode. If not, manually
switch it to this mode.
•Restart this product, enable Bluetooth function on your Bluetooth device,
and then try again.
•Reset this product to factory settings and try again.
No power
•Make sure that the power cable is properly connected.
•Make sure that the power supply is not disconnected.
No sound
•Make sure that this product and your device is properly connected.
•Make sure that the correct audio input source is selected.
•Make sure that the playback is not paused.
•Increase the volume of this product and your device.
Noise coming from speakers
EDIFIER speakers generate little noise, while the background noise of some
audio devices are too high. Please unplug audio cables and turn the volume
up. If no sound can be heard at 1 meter away from the speaker, there is no
problem with this product.
To learn more about EDIFIER, please visit www.edifier.com
For EDIFIER warranty queries, please visit the relevant country page on
www.edifier.com and review the section titled Warranty Terms.
USA and Canada: service@edifier.ca
South America: Please visit www.edifier.com (English) or
www.edifierla.com (Spanish/Portuguese) for local contact information.
R990BT
Multimedia Speaker
Passive speaker
" knob to power on/off the speaker.
" knob or " " button to switch to Bluetooth mode
Settings
Bluetooth
DEVICES
EDIFIER R990BT
Mode
Manual
2:12
Bluetooth
Press and hold to switch between work
mode and standby mode.
Press to switch input modes.
Rotate clockwise to increase volume.
Rotate counterclockwise to decrease
volume.
Press and hold to disconnect the current
Bluetooth device.
Press to exit from Bluetooth hidden mode
and enter Bluetooth pairing mode.
Bluetooth pairing mode
Bluetooth hidden mode
Bluetooth device connected
Switched to Line In 1 mode
Switched to Line In 2 mode
Upgrading the firmware
EDIFIER ConneX app
Active speaker
Quick start guide
Important safety instructions
Action
Speaker status
*