Publicidad
Idiomas disponibles
Idiomas disponibles
UNFOLDING ROLLATOR
1. Remove rollator from its packaging and place it so all four
wheels contact the floor.
2. While gripping handlebars, push outward until rollator is
fully open.
3. Once rollator is open, push firmly on both sides of the seat
to flatten it.
4. When the seat is completely flat, an audible click will be
heard.
Ensure the rollator is fully opened, the seat is snapped down.
To ensure that the seat is properly assembled for use, place
BOTH hands on the opposite sides of the seat frame. Push
down until you hear and audible click, letting you know
the rollator is ready for operation. Please also ensure the
backrest is locked and fully secured
images for reference.
SETTING SEAT HEIGHT ADJUSTMENT
1. Push detent button located outside the rear leg.
2. While depressing the button, pull the leg outward to increase
the seat-to-floor height. Push the leg inward to decrease the
seat-to-floor height.
3. Release the button and ensure the detent button fully
protrudes from the corresponding hole.
WARNING
BEFORE
use. See below
5
Publicidad
