Publicidad
Idiomas disponibles
Idiomas disponibles
2.4 Play mode setting
If you found the picture could not spread all screen
or no color, please select PAL, NTSC or auto by
pressing (P/N) key.
3. Basic operation
Please use remote control to operate the function as
described below:
Once all the connection of the system have been done,
this machine will be ready for service. Prior to play, make
sure to complete the following preparatory operations.
1. Switch on TV and select AV mode. If it s S-Video
connect select S-Video mode.
2. Switch on amplifier if it is connected, select AC-3 or
DVD mode.
3. Plug-in of DVD player
Step 1: Press STANDBY button on the front panel,
Disc Loading shown on screen.
Step 2: Press (OPEN/CLOSE) key on the front panel, the
tray comes out automatically.
Step 3: Place disc on the tray, press (OPEN/CLOSE) key
to close the tray, the disc type will be shown on the
upper left corner of the screen.
Note: Press (STANDBY) key on the remote controller to
bring the unit into standby status.
3.1 Play disc
Please use remote control to operate the function as
described below:
Once it has read the disc, this machine will start
playing automatically.
If it is a DVD, the machine will show the DVD menu or
title menu.
If it is a VCD2.0 disc, the machine will activate PBC
playback control status.
If it is a CD, this machine will start playing in the
sequence.
All manuals and user guides at all-guides.com
,
- 4 -
Press (PLAY) key to return play back while disc stop,
pause or step.
PAUSE key:
Press (PAUSE) key to put the playback in temporary
halt.
PREV key:
Press (PREV) key to skip backward to the title before
current.
NEXT key:
Press (NEXT) key to skip forward to the title after
current.
REV key:
Press (REV) key to get 2X, 4X, 8X, 16X or normal
play circular fast reverse function on disc playing.
FWD key:
Press (FWD) key to get 2X, 4X, 8X, 16X or normal
play circular fast reverse function on disc playing.
STOP key:
Press (STOP) key first time to follow by a (PLAY) key
will an auto resume to the last played location. Press
(Stop) key twice will halt the playback completely.
VIDEO key:
Press (VIDEO) key to select the signal source:
YUV,P-scan,Interlace.
Publicidad
