EFALOCK Professional LUMYNA Instrucciones De Uso página 11

ENGLISH
Directions for use:
▷ Make sure your hands are completely dry before connecting the device to the
mains.
1. Operate the on/off switch by pressing and holding the button.
2. Preset is cold air with room temperature and blower level 1.
3. Now set the desired temperature.
4. Indications in the LCD display: The display shows which settings you are using.
a ) Set air speed
b) Set temperature
Cold air function: Press the COOL SHOT button (in fig. to 5.) and release the button
to activate it. When the cold air function is active, the hairdryer blows cold air
regardless of the temperature setting. To deactivate this function, press the COOL
SHOT button and release the button.
▷ If the air inlet is blocked by clothes, towels, cotton, dust, etc., which may cover the
air inlet, the fan will turn off to prevent malfunction or damage due to overheating.
When the unit stops, the white light dot on the display will blink. You can stop this
protection by unplugging the power cord and turning the unit back on.
14102529_LUMYNA_IM.indd 11 14102529_LUMYNA_IM.indd 11
Warning light
11.06.24 12:00 11.06.24 12:00