Hilti SM 60-22 Manual De Instrucciones Original página 20

Status
One (1) LED shows yellow
One (1) LED quick-flashes red
3.4.2 Indicators showing the battery's state of health
To check the battery's state of health, press the release button and hold it down for longer than three
seconds. The system does not detect a potential malfunction of the battery due to misuse, for example
battery dropped or pierced, external heat damage, etc.
Status
All LEDs show in sequence, followed by one (1)
LED showing constantly green.
All LEDs show in sequence, followed by one (1)
LED quick-flashing yellow.
All LEDs show in sequence, followed by one (1)
LED showing constantly red.
4 Technical data
4.1 Product properties
Rated voltage
Rated speed under no load
Saw blade diameter
Saw blade disc thickness
Saw blade arbor size
Kerf width
Maximum miter angle
Maximum bevel angle
Maximum cutting capacity regardless of other
dimensions or miter angles
Weight
Ambient temperature for operation
Storage temperature
10 English
Meaning
The Li-ion battery and the product in which it is
inserted are not compatible. Consult Hilti Service.
The Li-ion battery is locked and cannot be used.
Consult Hilti Service.
Meaning
The battery can remain in use.
The check to ascertain the battery's state of health
did not complete. Repeat the procedure, or consult
Hilti Service.
If a connected product can still be used, the re-
maining battery capacity is below 50 %.
If a connected product can no longer be used, the
battery has reached the end of its useful life and
has to be replaced. Consult Hilti Service.
21.6 V
4,300 /min
305 mm
(12.0 in)
0.5 mm ... 1.5 mm
(0.02 in ... 0.06 in)
30 mm
(1.2 in)
3.2 mm
(0.13 in)
Right ≤ 60°
Left ≤ 52°
Right ≤ 48°
Left ≤ 48°
Height ≤ 100 mm
(≤ 3.9 in)
Width ≤ 360 mm
(≤ 14.2 in)
25.6 kg
(56.4 lb)
(without battery)
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
−20 ℃ ... 70 ℃
(−4 ℉ ... 158 ℉)
2395173
*2395173*