Descargar Imprimir esta página

HAMPTON BAY FLOWE 52-SKV Guía De Uso Y Mantenimiento página 6

Ventilador de techo de 1.32 m

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation
MOUNTING OPTIONS
WARNING: To reduce the risk of fire, electric shock or personal
injury, mount to an outlet box marked "Acceptable for fan
support of 35 lbs. (15.9 Kg) or less," and use the screws
provided with the outlet box. An outlet box commonly used for
the support of lighting fixtures may not be acceptable for fan
support and may need to be replaced. If in doubt, consult a
qualified electrician.
If your ceiling fan does not have an existing UL-listed mounting
box, then install one using the following instructions:
Disconnect the power by removing the fuses or turning off
the circuit breakers.
Secure the outlet box directly to the building structure. Use
the appropriate fasteners and materials. The outlet box and
its bracing must be able to fully support the weight of the
moving fan (at least 35 lbs.). Do not use a plastic outlet box.
The illustrations below show three different ways to mount the
outlet box.
Recessed
Outlet
Box
Outlet Box
Outlet Box
Provide Strong
Support
Ceiling
Mounting
Plate
NOTE: You may need a longer downrod to maintain proper
blade clearance when installing on a steep, sloped ceiling. The
maximum angle allowable is 30° away from horizontal.
If the canopy touches the downrod, then remove the decorative canopy
bottom cover and turn the canopy 180° before attaching the canopy to
the mounting plate.
To hang your fan where there is an existing fixture but no ceiling joist,
you may need an installation hanger bar as shown above
(available at any Home Depot store).
6
Hanger Bar
Outlet Box

Publicidad

loading

Este manual también es adecuado para:

42010999131000 022 6521000 019 369