Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
NOTE
LUBRICATION This tool is lubricated before it leaves the factory. But after using the
tool, the tool should be lubricated regularly. The daily maintenance of the tool is to inject the lubricant
between the ratchet housing and the ratchet anvil assembly (A) every month. Every three months, remove
the C-clip (B), then remove the internal parts of the ratchet housing assembly, and use the lubricant to
lubricate.
CLEANING
With the motor running, blow dirt and dust out of all air vents with dry air at least once
a week. Wear safety glasses when performing this. Exterior plastic parts may be
cleaned a damp cloth and mild detergent. Although these parts are highly are solvent
resistant, NEVER use solvent.
Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may become hazardous when used on
another tool.
Recommended accessories for use with your tool are available at extra cost from your
local service center.
IMPORTANT:
To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustments
should be performed by certified service centers or other qualified service organizations, always using
identical replacement parts.
Before disposing of damaged, check with your state Environmental
Protection Agency to find out about special restrictions on the disposal of
tool, charger and battery or return them to a certified service center for
recycling.
1English1
MAINTENANCE
Remove the battery pack from this tool before cleaning solutions.
ACCESSORIES
PROTECTING THE ENVIRONMENT
English
Fig. 5
-10
Publicidad
