Publicidad
Idiomas disponibles
Idiomas disponibles
STAINLESS STEEL SELF-TAP OPTION
1. Turn on the control display. Press and hold Start for 2 seconds.
2. To start juicing, make sure that the juicer is in "Ready" status (green Led on) and turn on the Self-Tap.
3. The machine will stop when the Self-Tap is closed , when the stop button is pressed , or when the number
of oranges indicated on the selector has been squeezed (Selector Operation).
LEVEL DETECTOR OPTION
1. Turn on the control display. Press and hold Start for 2 seconds.
2. Activate the level detector. Press the Start button
3. Start of squeezing. The machine will start the squeezing operation automatically when the tank level
detector detects that it is not at the "Maximum level".
4. End of squeezing. The machine will stop the squeezing operation when the tank level detector
detects "Maximum level" or when the Stop button is pressed.
MAINTENANCE STOP
Maintenance stop activation. With machine in "Stop" status, press and hold simultaneously the Stop button
and the Self-Cleaning/Home button. Machine will start turning until maintenance position is reached.
INVERTED TURN
Inverted turn activation. With machine in "Stop" status, press and hold simultaneously the Start and Stop
buttons.
SELF-CLEANING OPTION (ONLY FOR MACHINES INCLUDING SELF-CLEANING OPTION)
To start washing*: Make sure that any orange is inside squeezing area. To start washing press when machine
is running.
To finish washing: Automatic shower will stop washing when cycle time is completed or when pressing again.
* The automatic feeder is equipped with a Lock/Stop system to stop the feeding of fruits. Use this system to
lock the feeding before proceeding to start the washing.
AUTOMATIC FILTER (ONLY FOR MACHINES INCLUDING AUTOMATIC FILTER OPTION)
To start filtering: The automatic filter displacement will start at the moment the squeezing process is initiated.
To finish filtering: Filter displacement will stop 10 seconds after completion of the squeezing process.
Important: Machine will immediately stop running if a warning signal is received.
The cleaning process is very important to keep the juicer in perfect condition. In order to perform a correct
cleaning, you must take into account the following guidelines:
•
Do not allow the residues produced in the squeezing process to dry out.
•
Do not allow the juice to solidify in the different elements that make up the squeezing system.
•
Keep filters and squeezing elements free of pulp, seeds or rests of peels.
Page 13 / 72
E L E V A T I N G C U L I N A R Y E X C E L L E N C E
OPERATION
MAINTENACE
Publicidad
