Publicidad
Idiomas disponibles
Idiomas disponibles
E L E V A T I N G C U L I N A R Y E X C E L L E N C E
MAINTENANCE
PULP-OUT FILTER
1. Move the sweeper to one end of the filter.
2. Remove the Pulp-Out Filter assembly from its location by
lifting it slightly upwards and sliding it outwards.
3. Remove the cover. Remove the upper drop tubes by lifting
the part slightly upward to disengage them.
4. Unclamp and remove the lateral drop tubes.
Clean all the parts perfectly, as well as the machine block with
water and detergent.
The parts, with the exception of the cover, can be put in the
dishwasher at a maximum temperature of 40ºC.
Do not use abrasive products or solvents, as they could
damage the compound of the elements of the juicer system.
Do not clean the juicer assembly using pressurized water.
Dry the components of the squeezing system and the machine
block.
FRIGO STAND
1. Remove the upper cover of the tank by lifting it a few
millimeters and moving it horizontally. Remove the filter.
Unlatch the coupling plate and remove it. Remove the pump
cover. Remove the complete container. Disengage the piston
and the control lever.
Clean all the parts perfectly, as well as the machine block with
water and detergent.
The parts, with the exception of the machine cover, the
dispenser base and the cover, can be put in the dishwasher at a
maximum temperature of 40ºC.
Do not use abrasive products or solvents, as they could damage the compound of the elements of the juicer
system. Do not clean the juicer assembly using pressurized water. Dry the components of the squeezing
system and the machine block.
Page 18 / 72
Publicidad
