Publicidad
Idiomas disponibles
Idiomas disponibles
Ø
Setting the Temperature Control
Your unit has only one control for regulating the temperature in
the compartment. The temperature control is located on the
upper right hand side of the compartment.
The first time you turn the unit on, set the temperature control to
"7". The range of the temperature control is from position "0" to
"7". After 24 to 48 hours, adjust the temperature control to the
setting that best suits your needs. The setting of "5" should be
appropriate for home or office use.
To turn the refrigerator off, turn the temperature control to "0".
NOTE:
-
Turning the temperature control to "0" position stops the cooling cycle but does not shut off the
power to the unit.
-
If the unit is unplugged, has lost power, or is turned off, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the unit will not start.
Interior Light
When you open the door the light will be ON automatically. When you close the door the light will turn
OFF automatically.
NOTE:
·
IF THE UNIT IS UNPLUGGED, HAS LOST POWER, OR IS TURNED OFF, YOU MUST WAIT 3
TO 5 MINUTES BEFORE RESTARTING THE UNIT. IF YOU ATTEMPT TO RESTART BEFORE
THIS TIME DELAY, THE REFRIGERATOR-FREEZER WILL NOT START.
NOTE:
WE DO NOT RECOMMEND THE INSTALLATION OF THE REFRIGERATOR
WHERE THE TEMPERATURE WILL DROP BELOW 50ºF (13ºC) OR RISE ABOVE
110ºF (43ºC). THE COMPRESSOR WILL NOT BE ABLE TO MAINTAIN PROPER
TEMPERATURES INSIDE THE REFRIGERATOR.
FOR INSTALLATIONS WHERE THE TEMPERATURES WILL DROP BELOW 50º
SET THE FREEZER TEMPERATURE CONTROL TO THE "COLDEST" SETTING.
THIS WILL IMPROVE THE OPERATIONS OF THE REFRIGERATOR UNDER
THESE CONDITIONS.
OPERATING YOUR APPLIANCE
9
Publicidad
