SOMFY LSN 40 RTS Guia De Instalacion página 2

página de 8

/ 8
Marcadores

Idiomas disponibles

These instructions apply to all LSN 40 RTS drive, the different versions of which are available in the current catalogue.

FIELD OF APPLICATION

The LSN 40 drives are designed to drive all types of interior blinds except pantographs.

The LSN 40 drives are designed to motorise all types of:

– Interior vertical blinds which front rail moves solely by gravity with a mass less than 15 kg.

– Tiltable venetian blinds which bottom lath can be lifted at least by 4 cm when an upward force of 150 N is applied to the bottom lath positioned at 16 cm from the fully extended position.

LIABILITY

Please read these instructions carefully before

installing and using the drive. In addition to

following the instructions given in this guide, the

instructions detailed in the attached Safety

instructions document must also be observed.

The drive must be installed by a motorisation and

home automation professional, according to

instructions from Somfy and the regulations

applicable in the country in which it is

commissioned.

It is prohibited to use the drive outside the field of

application described above. Such use, and any

failure to comply with the instructions given in this

guide and in the attached Safety instructions

document, absolves Somfy of any liability and

invalidates the warranty.

CAUTION

The antenna should never be cut or degraded (Risk of alteration of the radio range).

The drive must be installed by a professionally qualified person (electrical specialist according to DIN VDE 1000-10) for drives and automations in the building services sector in accordance with the Somfy

instructions and the applicable regulations in the country of commissioning.

SPECIFIC INSTRUCTIONS FOR ASSEMBLY

LSN 40 RTS : interior diameter of the tube has to be Ø 37 mm or greater.

Frequency bands and Maximum power used

Power supply

SOMFY ACTIVITES SA, 74300 CLUSES FRANCE as manufacturer hereby declares that the drive covered by these instructions when marked for input voltage 230V~50Hz and used as intended according

to these instructions, is in compliance with the essential requirements of the applicable European Directives and in particular of the Machinery Directive 2006/42/EC, and the Radio Directive 2014/53/

EU. The full text of the EU declaration of conformity is available at www.somfy.com/ce. Philippe Geoffroy, Approval manager, acting on behalf of Activity director, Cluses, 09/2023.

We care about our environment. Do not dispose of the appliance with usual household waste. Give it to an approved collection point for recycling.

SOMFY ACTIVITES SA

50 avenue du Nouveau Monde, 74300 CLUSES FRANCE

INSTRUCTIONS TO BE RESPECTED

The installer must inform its customers of the

operating and maintenance conditions for the drive

and must provide them with the instructions for use

and maintenance, and the attached Safety

instructions document, after installing the drive.

Any After-Sales Service operation on the drive

must be performed by a motorisation and home

automation professional.