Publicidad
Idiomas disponibles
Idiomas disponibles
Page 7
Section 5
Attach Lowering Clamp Brackets
10mm Wrench
Nut, M6-1.0
Place the Lowering Clamp Bracket over the two protruding
screws with the step going toward the edge of the hard
top then place and tighten the M6 nuts. Repeat on the
other side of the vehicle.
Installation Instructions - Sunrider for Hardtop
P7 - 52460 Rev L 0424
© 2024 Bestop, Inc.
Publicidad
