INKBIRD ITH-20R Manual página 10

seconds. (Note: Up to 3 wireless remote sensors
can be connected, CH1 = wireless remote sensor
1, CH2 = wireless remote sensor 2, and CH3 =
wireless remote sensor 3)
Long press (5s): It can reset the synchronization
between the Temperature and Humidity Monitor
and all wireless remote sensor. After resetting, the
wireless remote sensor needs to be re-powered
(Re-install the battery) before it synchronize with
the Temperature and Humidity Monitor. (The
Temperature and Humidity Monitor and the
wireless remote sensor can be synchronized
within 2 minutes after the wireless remote sensor
is re-powered on), when synchronizing, try to
make the wireless remote sensor close to the
Temperature and Humidity Monitor and please do
not press any button.
°C/°F:
Quickly press:
1. When in normal working mode, press to switch
temperature unit to °C or °F.
2. When the display is showing the maximum
minimum temperature and humidity (press
7