Publicidad
Idiomas disponibles
Idiomas disponibles
LP TANK TIE-DOWN (for built-in island installations)
Outdoor cooking applicances require an integral
means of limiting the movement of the LP gas cylinder.
For built-in appliances which require the use of a
remote LP gas supply cylinder (island applications), a
retaining device must be created.
Lateral movement shall not exceed 1" (25.4 mm) at
the retention means. The cylinder, or any portion of,
shall not become dislodged from the retention device
when a lateral force of equal weight to the cylinder is
applied, from any direction, at the center of the vertical
height of the cylinder.
Retaining device must not interfere with the operation
of the cylinder valve, and no movement shall transmit
strain to rigid tubing or pipe/hose connections. Hose
must not touch any portion of the grill/appliance. (ANSI
Z21.58z, latest edition/CGA 1.6z, latest edition)
LP GAS GRILL CONNECTIONS TO A GRILL OR COOKTOP
Single Gas Cooktop or Grill Connection
3/8" Flare
Fitting
20-lb. Type 1 LP Tank
Built-in models shown.
12
All manuals and user guides at all-guides.com
Installation
LP Hose and
Regulator
LP tank is inserted into frame.
LP tank is secured with fixed
thumbscrew on three sides.
8-1/4"
8-1/4"
Tee Nut 1/4-20
Recommended
(3 Sides of Frame)
To connect 20-lb. LP tank:
• Attach the regular hose assembly to the brass
elbow. Do not use threading compound.
• Insert the coupler sleeve on the regulator over
the tank inlet; turn clockwise to tighten. Do not
overtighten the coupler.
To disconnect from the 20-lb. LP tank:
• Turn tank valve to OFF.
• Grasp the coupler sleeve, turn counterclockwise
and remove.
1" Min.
Thumbscrew 1/4-20
right angle or spaded
2" long (3 required)
31-11026
Publicidad
