Publicidad
Idiomas disponibles
Idiomas disponibles
3. ATTACH MOWER
SIDE SUSPENSION
ARMS (A) TO CHASSIS
- Position hole
in arm over pin (B) on outside
of tractor
chassis
and secure with retainer spring.
4. Repeat
on opposite
side of tractor.
7. Insert end of link (E) into hole in front
mower
bracket
(H) and secure
with
washer
and retainer spring (J).
5. A-FFACH REAR LIFT LINKS (C) - Lift
rear corner of mower and position slot
in link assembly over pin (D) on rear
mower bracket and secure with washer
and retainer spring.
8, Hook end of clutch cable spring (Q) into
hole in idler arm (R).
9, Push clutch cable housing guide (P) into
bracket,
slide collar (L) onto guide and
secure with retainer spring (K).
10. install belt onto engine pulley (M) and belt
keepers (G).
6,
ATTACH
FRONT
LINK (E) - Work from
left side of tractor. Insert rod end of link
assembly
through
front hole in tractor
front suspension
bracket (F).
IMPORTANT:
Check belt for proper routing
in all mower pulley grooves.
11,Raise
attachment
lift iever
to highest
position.
12. If necessary, adjust gauge wheels before
operating
mower as shown in the Opera-
tion section
of this manual
08042tex
22
Publicidad
