Publicidad
Idiomas disponibles
Idiomas disponibles
hold the AC button for 3 seconds to enter the frequency switching
mode, the 50Hz or 60Hz icon will flash on the display, short press the
AC button again to select 50Hz or 60Hz; when the icon stops flashing
and displays 50Hz or 60Hz, it indicates the switch is successful.
Solar Input Port
8
This interface supports solar panel input or car charger input. For
details, please refer to "Solar Panel Connection" on page 8 of this
manual and "Car Charging" on page 9.
AC Input
9
To charge the product by a household socket can achieve 1000W fast
charging. It only takes about 1.2 hours to fully charge from 0 to 100%.
When charging in this way, please pay attention to the following points:
※ Please directly plug in the wall socket to charge the product, do not use extension-
cords or cable taps, otherwise there is a risk of damage to the extension cords and
cable taps or even a fire.
※ If the extension socket is plugged in to charge this product, please do not connect
other electrical appliances to this socket, otherwise the household meter may trip.
10
When the power supply current is unstable due to lightning or other
reasons, and there is a large current input at the AC Input, in order to
protect the product, the overload protection function (safety circuit
breaker) will activate and cut off the AC input port.
Please follow the sequence below to restore the AC input function:
1) Turn off the power button and unplug all ports.
2) After confirming that there is no abnormality in each part, turn on the power button.
3) Press the overload protection button, connect the AC Cable to restore the AC input.
Light Button
11
Instructions: Short press the Light Button, the LED lights are all on;
short press again, the LED light enters the SOS mode, short press in
turn, enter the strobe mode, and finally the LED light turns off (LED in
any mode, long press the light button for
the LED light).
1 second , directly turn off
4
Publicidad
