Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLE
SHOOTING
MODEL: PMPN
REEMAN
1. Lubricate nailer.
2. Replace and lubricate O-rings.
3. Check and adjust pressure.
Nailer operates slowly
1. Nailer not lubricated sufficiently.
or has loss of power
2. Worn O-rings.
3. Low air pressure.
A WARNING:
Stop using tool immediately if any of the following problems occur. Serious personal injury could
result. Any repairs or replacements must be done by a qualified service person or an Authorized
A WARNING:
Use only Freeman Authorized Repair Parts. For questions please call 1-888-669-5672 or visit our
website at http://www.freemantools.com
service center.
PROBLEMS
POSSIBLE CAUSE(S)
CORRECTIVE ACTION
Air leaking between
1. Loose screws in housing.
1. Tighten screws.
housing and cap
2. Damage to cap gasket.
2. Replace cap gasket.
Air leaking through cap | 1. Air escaping from tool.
1. Slap the cap side of the tool into
exhaust or nose area
the palm of your hand with enough
force to reset the internal piston.
2. Damaged O-Ring
2. Replace O-rings.
Nailer not setting
1. Nail guide loose.
1. Tighten nose guide.
fastener completely
2. Inadequate air flow to nailer
2. Check hose, fitting, or compressor.
14
HTTP://WWW.
FREEMANTOOLS.
COM
1-888-669-5672
WEARING PARTS
Repair parts can be ordered from our website: http://www.freemantools.com
HTTP://WWW.
FREEMANTOOLS.
COM
1-888-669-5672
15
Publicidad
