AVer M70Wv2 Manual De Instrucciones página 5

Remote Control
1
2
3
4
5
6
7
8
9
10
Control Panel
Name
1. POWER
11
2. Wi-Fi/USB
12
13
3. CAPTURE
14
15
16
4. FREEZE
17
18
5. ROTATE
6. INFO/
19
20
7. ▲,▼,◄, & ►
8. AUTO FOC
21
9. ZOOM +/-
22
10. ZOOM 1X
11. MUTE
12. CAMERA / PC
13. RECORD
14. RESOULTION
15. AE LOCK
16. LAMP
17. DEL
18. MODE
19.
20. VOLUME +/-
21. BRIGHTNESS
+/-
22. RESET +/-
23. Wi-Fi Indicator
English-3
Function
Turn the camera on or off.
Switch between Wi-Fi and USB modes.
Capture still image in Camera mode. In
continuous capture mode, press this button
again to stop.
Freeze live images.
Rotate the image by 0/180° in Camera
mode.
Press to view system information and battery
power status.
Pan and zoom-in image in live streaming.
Adjust the focus automatically.
Increase/decrease the image magnification
in camera mode.
Reset zoom level to 100%.
Set the volume to mute.
Switch the video signal between camera and
computer from the HDMI Input port
Start/Stop audio & video recording. Video
recording can only be saved in a USB flash
drive.
Press to switch between following modes:
- Auto detects the best resolution(4K, 720P,
1080P)
- 1024x768 (in supported HDMI device)
- 4K 60Hz (in supported HDMI device)
Lock the exposure to stop M70Wv2
attempting to find optimal exposure.
Turn the overhead light on/off.
Delete the selected picture/video in
Playback mode.
Press to switch between Normal, High
frame, and High quality, Microscope, Infinity,
or Marco mode.
Make a selection.
Adjust the volume.
Adjust the brightness.
Reset to factory default setting.
Wi-Fi status indicator: Refer to <LED
Indicator>.