PERFECTPRO DPR2-18V Instrucciones De Uso página 4

● Do not puncture, crush, modify, throw or cause any
unnecessary shock to your battery, as the battery used
in this device may present a risk of fire, explosion, or
chemical burn if mistreated.
● Do not leave, charge or use the battery in a car under
direct sunlight, near fire or a heated source.
● Do not immerse or throw the battery in water /
seawater.
● Do not use or charge the battery if it appears to be
abnormally hot, discolored, deformed or abnormal
conditions are detected during use, charge or storage.
● Do not leave a charging battery unattended. Keep the
battery away from babies and children.
● CAUTION: 'Risk of explosion if the battery is replaced
by an incorrect type.'
● CAUTION: Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent
type.
● The battery combination is stored at room temperature
(25 degrees), charged to 40% ~ 60% of the power,
charge once every three months, for the storage of
more than a year of battery, performance cannot be
guaranteed.
● CAUTION: This equipment is intended to use with
18V BOSCH Li-ion battery pack
"Wolves I" and "Wolves II 1.5Ah").
● Intended for use with PBA BOSCH battery packs
of the same voltage class.
Operating with external 18V BOSCH Li-ion
battery pack
Note: The 18V BOSCH Li-ion battery packs "Wolves I"
and "Wolves II 1.5Ah" cannot be used with this radio.
When using battery power, a battery symbol will appear
in the upper right corner of the screen after power on.
Reduced power, distortion with stuttering sound, red
low-battery indicator lights up, or the empty battery bar
flashing on the display could be a sign that the battery
needs to be replaced.
● To install the battery pack, align the tongue on the
battery pack with the groove in the housing and slip it
into place. Always insert it all the way until it locks in
place with a little click.
● To remove the battery pack, slide it from the radio while
pressing the button on the front of the battery pack.
CAUTION:
● Always attach the battery pack completely. If not, it may
accidentally fall out of the battery bay, causing injury to
you or someone around you.
● Do not force attach the battery pack. If the battery pack
does not slide in smoothly and does not engage, it is
not being inserted correctly.
(except
(Fig. 2-4)
Using the AC power adapter
The AC / DC Switching adapter supplied with this unit
has an output of 19V - 1.2A center pin positive. Insert
the adapter plug into the DC socket on the rear of the
radio. Plug the adapter into a standard AC outlet. The AC
adapter should be disconnected from the AC outlet when
not in use for long periods of time.
Whenever the adapter is used, the battery is automatically
disconnected.
IMPORTANT: The AC adapter is used as the means
of connecting the radio to your power supply. The AC
adapter used for the radio must remain accessible during
normal use. In order to disconnect the radio from the
power supply completely, the AC adapter should be
removed from the power supply outlet completely.
Listening to DAB radio
Tuning into DAB stations
To tune into DAB radio stations, follow these steps:
1.
Be sure to screw in the antenna properly to get best
reception. Turn on the radio using the Power button.
2. Select the DAB radio mode by repeatedly pressing the
Source button.
3. If this is the first time the DAB radio mode is being
used, the radio will automatically perform a full scan in
order to find all available DAB radio stations. During
the scanning process, as new stations are detected
the station counter will increase and the stations will be
added to the list which is stored in the radio. The bar
graph indicates the progress of the scan.
4. When scanning is completed, the radio will list all
stations that were found. Rotate the Tuning knob to
access the radio station list and scroll through the
available stations. Then press the Tuning knob to tune
into a station.
5. Use the Volume knob to set the sound level as needed.
The DAB radio menu
You can open the DAB radio menu by pressing and
holding the Info / Menu button while the radio is in the
DAB radio mode.
Rotate the Tuning knob to select one of the options and
then press the Tuning knob to confirm your choice. Press
the Info / Menu button to go back to the previous page.
The radio's default and recommended settings are
indicated using an asterisk.
The DAB radio menu offers the following options:
● [Full scan]: Select this option to perform a full scan
and store all DAB radio stations that were found in the
station list.
● [Manual Tune]: Select this option to manually tune into
a DAB channel / frequency.
● [DRC Value]: Dynamic Range Control (also known as
DRC) can make quieter sounds easier to hear when
your radio is used in a noisy environment by reducing
the dynamic range of the audio signal.
After selecting this option, select the required DRC
setting:
GB
NL
DE
FR
ES
ITA
SV
DAN
NOR
PL
3